S. 01 (2024): Tạp chí Khoa học - Công nghệ thủy sản

DOI: https://doi.org/10.53818/jfst.01.2024

Đã Xuất bản: 05-04-2024

Cả số
Table of contents (English)

Khoa học công nghệ thủy sản

Modeling and simulating axial vibrations on the crarkshaft of the large two-stroke marine diesel engine
Ngo D.Vuong, Lai H.Thien, Luu M.Hai, Hoang Q.Dong, Vu V.Tuyen, Do D.Luu

Các trang 003-008

Full paper (English)
Multi-layer material combination for manufaturing stab-proof life jackets
Duong Tu Tien

Các trang 009-015

Full paper (English)
Exploring the impact of industry 4.0 on marine mechanical engineering in the Philippines: Opportunities and challenges in the 21st century
Robert Michael B. Corpus, Meldanette S. Bayani

Các trang 016-020

Full paper (English)
Design optimization of a marine refrigeration system with waste heat recovery channel
Marcelo April L., Palisoc Arriane A., Marcelo Luvisminda D.

Các trang 021-024

Full paper (English)
Innovative approaches for sustainable marine ecosystem conservation and pollution mitigation in the Philippines: A comprehensive analysis of technological and policy innovations
Meldanette S. Bayani, Robert Michael B. Corpus

Các trang 025-030

Full paper (English)
Effect of the addition of fish protein isolate on biscuits’ physicochemical and sensory properties
Huynh Nguyen Duy Bao, Nguyen Ngoc Thuy Dung

Các trang 031-037

Full paper (English)
The effect of liquid smoked flavourings and wood smoke on the quality of smoked mackerel fillets during chilled storage
Huong Thi Thu Dang, Magnea G. Karlsdottir, Sigurjon Arason

Các trang 038-048

Full paper (English)
The importance of technology and cold chain logistics in Vietnam's preservation of harvested seafood
Minh Huong Tang, Thu Hoa Ho Thi

Các trang 049-057

Full paper (English)
Studying influence of the mathematical model error on the results of calculating freedom torsional vibration for marine diesel propulsion system
Bui Minh Tuan, Do Duc Luu, Lai Huy Thien, Luu Minh Hai

Các trang 058-062

Full paper (English)
Advancing turning performance of C45 steel for marine applications: A comprehensive study on optimizing cutting conditions
Huu That Nguyen, Ngoc Chien Vu

Các trang 063-069

Full paper (English)
Analysis sedan vehicle structure in frontal impact using computer model
Nguyen Phu Thuong Luu, Ly Hung Anh, Pham An Binh

Các trang 070-074

Full paper (English)
A numerical study on thickness of rear under-ride protection in case pick-up to semi-trailer full rear impact
Nguyen Phu Thuong Luu, Pham Cao Anh, Kim Yonghun

Các trang 075-079

Full paper (English)
Dynamic balancing of rigid rotors by the influence coefficient method
Tuan Le Dinh, Thanh Bui Trung, Ngoc Anh Vu

Các trang 080-088

Full paper (English)
Effect of probe length on tensile strength of dissimilar friction stir welded lap-joint between AA6061 and 316 stainless steel using marine structure
Huy Huu Ho, Quan Minh Nguyen, Thuyen Van Phi, Hao Dinh Duong, Tra Hung Tran

Các trang 089-094

Full paper (English)
The intake port of DI-engine type VIKYNO RV165 desinged using 3D-CAE software
Luong Huynh Giang, Chau Vo Tan

Các trang 095-102

Full paper (English)
Apply and improve the association rules in predicting national high school admission scores to Nha Trang University
Pham Thi Thu Thuy, Bui Xuan Huy, Truong Minh Hieu, Kim Hwa Soo

Các trang 103-109

Full paper (English)
Design and simulation of structural durability of passenger car front in collision
Phuong Vu Hoang, Tung Pham Son, Duong Hoang Ngoc, Nguyen Nguyen Khoi

Các trang 110-115

Full paper (English)
Researching the force absorption system for the front of the passenger car to secure the driver
Phuong Vu Hoang, Tung Pham Son, Duong Hoang Ngoc, Nguyen Nguyen Khoi

Các trang 116-120

Full paper (English)
Mechanical and thermal transport in nanoporous graphene-like BC6N
Thi Bao Tien Tran, Huu Nghia Nguyen, Van Thai Nguyen

Các trang 121-128

Full paper (English)
Optimizing SKD-61 steel machining for marine component manufacture: A grey-Taguchi study on nanofluid minimum quantity lubrication
Ngoc Chien Vu, Xuan Phuong Dang, Shyh Chour Huang

Các trang 129-133

Full paper (English)
Effects of impact location on the dynamic response of repeatedly impacted aluminum alloy plates
Dac Dung Truong, Tan Khoa Dang, Tan Loi Vo, Viet Loi Dau

Các trang 134-141

Full paper (English)
Mechanical properties of fabric-reinforced geocomposites in accordance with novel size-independent flexure-test technique
Doan Hung Tran, O. Bortnovsky, D. Kroisova, Quang Nguyen Pham

Các trang 142-150

Full paper (English)
Effect of welding speed on mechanical properties of dissimilar friction stir lap-joint welding between AA6061 and C1100 copper
Vu Nguyen Le Anh, Quan Nguyen Minh, Thuyen Van Phi, Hao Dinh Duong, Tra Hung Tran

Các trang 151-159

Full paper (English)
A short review of marine renewable energy: Generation, storage, and applications
V. L. Trinh, C. K. Chung, X. C. Nguyen, T. S. Nguyen

Các trang 159-166

Full paper (English)